120℃ 9kw Water Temperature Control Unit / For Rubber And Inject
Temperature control units are used to heat up the mould and
maintain temperature, and they can be used in other similar
applications. High temperature water from the mould is returned to
the cooling tank and cooled direct cooling.
MAX TEMPERATURE:120℃ power of heating :9 kw
All-purpose water-operated temperature control units up to 120°C
are the core products of KASSEL’s product range. Due to the fact
that these units are available in many different dimensions for the
medium to high capacity range and cater to a wide variety of
different temperature ranges, they are at the heart of many special
and customized configurations. These units excel with utmost
reliability and precision and offer a virtually unlimited number of
options to cater to a wide variety of requirements.
Pump pressure (KG/CM²)
Max pump flow L/MIN
Alert function: pump reversal/oil shortage/overheating/overload/oil
1. PID temperature control, high temperature control precision,
tolerance within ±1 °C .
2. Using gear pumps, which are of high pressure, high flow rate,
low noise and stability.
3. PC board with fault indication when a failure occurs, it can
accurately detect the fault or abnormity.
4. Oil gauge designed to reduce leakage point, easy to operate.
5. No piping design to reduce leakage point and make the system
6. Using an independent over-temperature controller to prevent
7. Heating pipes are made of thick-walled seamless stainless steel
8. Electric tube designed with a large heat transfer area, which is
9. Simple design, elegant appearance.
10. Two types available: water carrying type and oil carrying type.
120 ℃ water temperature machine structure performance introduction
A, mode of operation
1, imported PC microcomputer touch control, elegant appearance;
2, ONE-TOUCH automatic exhaust function after boot, mold air can be
automatically heated after the exclusion.
B, mechanical piping system:
1, the internal piping are all seamless 304 stainless steel
one-piece molding, heating evenly, tube loss is small;
2, with pressure relief circuit device, water shortage alarm,
protection pump and heating pipe.
3, heating and cooling speed, stable fast, empty machine warmed to
150 ℃ for about 5 minutes.
4, the circulatory system pump using "Okrank" high pressure 180 ℃
hot water pump, good thermal conductivity,
Mold warming fast, small temperature difference, more than 20%
5, the use of flange-type Swedish wire dual-power stainless steel
heating tube, suitable for different temperature control
Imported heating wire, long life, easy to burn out;
6, pressure instructions;
7, the solenoid valve imported from Taiwan Dingzhao UNID, high
temperature 180 ℃.
8, backwater temperature gauge, can monitor the mold hole with or
without blocking, injection molding conditions are stable.
9, high-pressure safety protection system, explosion-proof device.
10, high-pressure safety valve
11, the pressurized system pumps Italy "Fide Germany" small flow,
12, Cooler: South Korea "Boreijing" plate heat exchanger, cooling
speed, temperature control accuracy.
If the 120℃ 9kw water temperature control unit for high temperature
runner model caters to your requirement, welcome to buy the precise
equipment made in China from our factory. We are one of the
professional manufacturers and suppliers in China who can offer you
unmatched services and prices. And the customized service is also
available. Don't hesitate any more.